Specifications and Sailplan dimensions for the Montgomery 15
SPECIFICATIONS:
| L.O.A. |
15′0″ |
| L.W.L. |
13′3″ |
| Beam |
6′2″ |
| Sail Area |
122 sq. ft. |
| Draft |
|
| Board up |
15″ |
| Board down |
2′1/2″ |
| Weight |
750 lbs. |
| Ballast |
275 lbs. |
| Centerboard weight..40 lbs. (aprox.) |
| Mast height above waterline…22′3″ |
KEY TO SAIL DIMENSIONS
- I—distance between top of forestay and the foredeck
- J—distance from forestay chainplate to mast
- P—distance from boom to top of mast
- E—length of boom
THE STANDARD BOAT SAILPLAN DIMENSIONS
| Data courtesy of: sailrite |
| I |
J |
P |
E |
| 15.33ft (4673mm) |
4.58ft (1396mm) |
16.83ft (5130mm) |
7.83ft (2387mm) |
SAILPLAN DIMENSIONS
(from Sailrite Sails):
| MONTGOMERY 15 MAINSAIL |
Price This Sail |
| Luff |
17.25* |
| Foot |
7.50* |
| Leech-AftHdBd |
18.45* |
| Tack Ang |
88.01* |
| Diag (clew/head) |
18.57* |
| Head (inches) |
3.50* |
| Area (no Roach) |
64.60 |
| Comments |
|
|
| MONTGOMERY 15 GENOA |
Price This Sail |
| Luff |
14.91* |
| Foot |
7.43* |
| Leech |
14.06* |
| Perc LP |
150* |
| Length Perp |
6.93* |
| Deck Angle |
4* |
| Area |
51.67 |
| Comments |
|
|
| MONTGOMERY 15 JIBSAIL |
Price This Sail |
| Luff |
12.56* |
| Foot |
6.08* |
| Leech |
10.97* |
| Perc LP |
115* |
| Length Perp |
5.31* |
| Deck Angle |
12* |
| Area |
33.35 |
| Comments |
|
|
| MONTGOMERY 15 SPINNAKER |
Price This Sail |
| Stay |
14.91* |
| Foot |
8.32* |
| MidGirth |
8.32* |
| Perc LP |
180* |
|
|
|
|
| Area |
105.44 |
| Comments |
|
|
| MONTGOMERY 15 STORMJIB |
Price This Sail |
| Luff |
12.167ft (3708mm) |
| Foot |
4.83ft (1472mm) |
| Leech |
8.98ft (2737mm) |
| Perc LP |
67.03* |
| Length Perp |
3.07*ft (935mm) |
| Deck Angle |
33.89* |
| Area |
18.68*ft2 (1735mm2) |
| Comments |
|
|
|
* An asterisk after the sail dimensions above indicates that a computer algorithm was used to determine the figure shown based on partial data (usually the I, J, E, and P). Needless to say, these data should be carefully checked. If there is no asterisk, the poster has input the data. The source for this data will be indicated on the source line at the top of the page. No matter the source, we highly recommend that all measurements be checked carefully before utilizing them. More Detail
Comments Off
